Corrosion Inhibitors
A series of comprehensive Corrosion Inhibitor Solutions for industries involved in oil & gas production, transportation as well as refinery operations.
CPAI-609
Acid fracturing, 60~90℃, 15~20% HCl and high concentration Mud Acid(HF + HCl)
CPAI-909
Acid fracturing, 60~90℃, 15~20% HCl and 10% HCl + 8%HBF4)
CPAI-409
Acid fracturing, 90~120℃, 15~20% HCl and high concentration Mud Acid(HF + HCl)
CPAI-014
Acid fracturing, 120~140℃, 15~20% HCl and high concentration Mud Acid(HF + HCl)
CPAI-016
Acid fracturing, around 160℃, 15~20% HCl and high concentration Mud Acid(HF + HCl)
CPR-902
Injection Water Corrosion Inhibitors, for the corrosive environment containing CO2, H2S and other acidic gas content not higher than 20% and mineralization not higher than 200,000mg/L brine, at < 100℃.
CPT-901
Applicable to the corrosion of oil gathering and transmission pipelines containing high partial pressure CO2, H2S and other acidic gases and higher mineralization brine, as well as to the control of high partial pressure CO2 on pipeline corrosion in the process of injecting CO2 into the oil field to drive oil.
CCO-2901
Suitable for the control of corrosion in the corrosive environment of high partial pressure CO2 and high mineralization brine in the process of CO2 oil drive in oilfields and the corrosion control of oilfield wastewater systems containing certain partial pressure CO2.
CIC-1901
Applicable to industrial boilers or chemical equipment used in the field of chemical cleaning 6 ~ 10% hydrochloric acid, citric acid, EDTA, hydroxyacetic acid or mixed acid acid acid cleaning process, the temperature below 100 ℃ can be applied.
